梅子熟了电视剧,97人人网,冲动的惩罚动漫1～6完整版,亚洲黄色官网

<ul id="gscgk"></ul>

<tr id="gscgk"></tr>

Welcome to Shenzhen Grande Electronic Co., Ltd.!

Shenzhen Grande Electronic Linkedin Page

E-mail us for a Quote:
sales88@greattong.com

Call us now:
+86-755-83261869

How to Review BOM and Gerber Files?

2017-06-19

Shenzhen Grande Electronic has capable engineers to meet the committed tasks of the customers. We only need your requisite bill of materials (BOM) and Gerber files to review. Some customers will contact us due to our stringent adherence to prescribed guid

PCB Layout: How To Place Diodes Using Silk Screen Marks

2017-06-16

PCB Layout Diodes are polarized components that must be placed on a PCB in a certain way. However, a board that has a (+) silk screen marking is not enough information to tell the assembly house how to correctly insert a diode because there are different

PCB Assembly: How to optimize the reflow profile?

2017-06-15

According to the recommendation by the IPC association, the generic Pb-free solder reflow profile is shown below. The GREEN area is the acceptable range for the whole reflow process. Does it mean that every spot in this GREEN area should fit your board re

PCB Assembly: How to Maintain a Reflow Oven?

2017-06-14

Proper reflow overn maintenance can extend its life cycle, keep the machine in good condition, and improve PCB Assembly production efficiency and product quality. One of the most important tasks for properly maintaining a reflow oven is remove the built-u

How to get real-time thermal data for a PCB?

2017-06-13

Althoughthereisathermaldatatestingfunctionforourreflowoven,ShenzhenGrandeElectronic stillusesahigh-end,off-line,KICthermalprofilerasourkeyinstrumentforoptimizingth

How to Request a PCB Assembly Quote in China?

2017-06-12

Shenzhen Grande Electronic functions with the support of experienced resources and latest technology. So it is not difficult to request a PCB assembly quote from Shenzhen Grande in China. Many buyers contact us and request for circuit board assembly quote

How to Prevent the Tombstone and Open Defects during the SMT Reflow Process

2017-06-10

The tombstone phenomenon is a defect that occurs when passive SMT components are partially or completely lifted from the PCB pad. What usually occurs is that one end of chip is soldered on the PCB pad while opposite end of the chip stand ups vertically, l

How to Prevent Solder Joint Voiding and Cold Solder Defects

2017-06-09

Solder joint voiding is a phenomenon that causes empty spaces or voids to occur within the joint. Solder joint voiding often occurs on BGAs and larger pads. Voids are related to flux that’s entrapped in the joint, as well as paste oxidation.

How to Prevent Solder Bridging in 3528 PLCC6 RGB LEDs?

2017-06-08

The 3528 PLCC RGB LED*, such as theLG LEMCS32F00AZ01, has ultra high brightness in a compact size. Heat dissipation should be considered during layout design. The traces that connect each LED pad should be designed as wide as possible.

How to Prevent Solder Ball and Bridging Defects during the SMT Reflow Process

2017-06-07

A solder ball is the most common type of defect that occurs in the SMT assembly process. Solder balls, which have a diameter are greater than 0.13mm or they are within 0.13mm of traces, violate the minimum electrical clearance principle.

First - Previous -65 66 67 686970 71 72 73 74 - Next - End

Home About Us Services Quality Pb-Free News Contact Us

Copyright ® 2017,Shenzhen Grande Electronic Co., Ltd. All Rights Reserved. English 中文站 Sitemap

<samp id="mumee"><tbody id="mumee"></tbody></samp>

<tr id="mumee"><rt id="mumee"></rt></tr>

<ul id="mumee"><center id="mumee"></center></ul>

<strike id="mumee"></strike>